NXT 2.0 & Bummed

[3Fitty]

Re: NXT 2.0 & Bummed

No sense in just sitting around watching wax dry when there's other things to do!

Yes, but this usually means doing the interior and you how most of us feel about doing the interior!!!

[InfiniteDetail]

Re: NXT 2.0 & Bummed

I use TechWax all the time here in AZ with no problems at all. I apply a very thin using a PC and finishing pad.

[Wolf-Strong]

Re: NXT 2.0 & Bummed

Just so you all know, our original poster, Gavin, followed Mike Phillips advice and contacted Customer Care here at Meguiar's and in a brief email exchange it seems the issue may well have been insufficient drying time. Gavin only gave it about 15 minutes and depending on humidity, temp, etc that may not have been enough time to fully dry.

There have been plenty of discussions here on MOL about using products in different parts of the country and how that impacts them - Houston, TX with 90 degree heat and 98% humidity will impact a product differently than Los Angeles, CA with 90 degree heat and 10% humidity. This is why the swipe test is so important. Plenty of guys like to err on the cautious side of things - apply the wax and then either put away all their detailing supplies and get the garage cleaned up.....or grab some lunch. No sense in just sitting around watching wax dry when there's other things to do!

Yup yup!

Yes, but this usually means doing the interior and you how most of us feel about doing the interior!!!

You gave me a good laugh!

[100kdown]

Re: NXT 2.0 & Bummed

Michael beat me to the punch on reporting my input from Customer Care. In my case, the drying time may be the culprit and I really appreciate the quick response from Michael. I'm going to try another coat of NXT, scrub carpets for an hour-Yuk!-and then wipe. I'll let you guys know how it comes out. FWIW, the abient around here is 85F, 70-75RH. It'll be pushing 95+/95+ by August.