Tweet
Color RX
When using Color RX is it better to use it with a DAP or to do it by hand when applying? I am new to using it and i want to know what I should do to get the best look out of it.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
Steve Kelly
2013 Passat SEL TDI -
i have found that using colorx with the pc works better. but... that doesn't mean that you can't obtain good results by doing it by hand, as mike demonstrates here -->http://meguiarsonline.com/forums/sho...ghlight=bronco
Last edited by imacarnut; May 15, 2006, 08:52 PM. -
thanks.... that helps.Steve Kelly
2013 Passat SEL TDIComment
-
If you are cleaning the car's finish with colorx, it is more effective to use it with the pc. Speed 5 with the g-100 on a w8006 pad can really get the job done!Proud owner of the finest looking car in the parking lot.
Switch to Linux. Use energy efficient lightbulbs and appliances. Keep your car well maintained and drive easy to save gas. Eat less fast food. Call your mother and tell her you love her. Try flying a kite. Read a wikipedia article daily. Use Meguiar's.Comment
-
When are the step's when applying Color X? Like can you polish and wax over the Color X after it has been applied.Comment
-
ColorX is an effective cleaner wax. It can be used to great effects when you are in a pinch for time, or if the person doesn't want to go into great extent when detailing his/her car.
Steps could include something like:
Wash
Clay
ColorX
Wax/Sealant of your choice.
This is a simple plan that will yield excellent results for the time it takes, and will be especially evident on darker colors.
ColorX does not HAVE to be topped, but it is probably a good idea to. I like ColorX topped by Nxt for a quick and easy combo, it easily sufficed for my few details throughout my freshman year fo college.Comment
-
Yeah I am using it on a 10 year old paint job. I cab look and see that it is fadding. My clear coat it bad too. I am hoping that colorX will help it from getting really bad.Steve Kelly
2013 Passat SEL TDIComment
-
This may sound like a dumb question but why is the pad like a greenish blue.
http://meguiarsonline.com/forums/sh...ighlight=bronco
Last edited by JG_Detailing; May 17, 2006, 10:53 AM.Comment
-
I think it's because it is single stage paint versus base coat/clear coat...Comment
-
From what I remember, ColorX is blue so that could be the ColorX on the applicator?Let's make all of the cars shiny!Comment
Comment