To help me buff the van Who's with me?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Thursday, March 5th, Dallas Texas......BE THERE!
Collapse
X
-
Re: Thursday, March 5th, Dallas Texas......BE THERE!
Mapquest says,
Total Estimated Time: 20 hours 4 minutes
Total Estimated Distance: 1357.00 miles
Throw in a few Pit Stops and chances are good you would be done by the time I arrived...
Maybe next time...
Comment
-
Re: Thursday, March 5th, Dallas Texas......BE THERE!
okay, so when you doin this? i could possibly make it down depending on the time, i have a lil bit of stuff to do in the early afternoon but it shouldnt take me all day lol, so let me know when you gonna be working and i could stop by. just give me a text or somethin
Comment
-
Re: Thursday, March 5th, Dallas Texas......BE THERE!
Originally posted by Mike Phillips View PostMapquest says,
Total Estimated Time: 20 hours 4 minutes
Total Estimated Distance: 1357.00 miles
Throw in a few Pit Stops and chances are good you would be done by the time I arrived...
Michael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
Comment
-
Re: Thursday, March 5th, Dallas Texas......BE THERE!
Hey John, yeah, I've already got started. Lots of real estate on this thing!!!
I'll splurge for the pizza
Call me when you're ready to head over, and I'll give you the address.
Nick2008 Meguiar's Batmobile Team
2008 Meguiar's/Ford SEMA Team
2009 Meguiar's/Ford SEMA Team
2010 Meguiar's/Ford SEMA Team
Comment
-
Re: Thursday, March 5th, Dallas Texas......BE THERE!
Originally posted by Nick Chapman View PostWhat are you talking about?
"I can tell you that the products used were M105 and M205 then finished off with 2 coats of #26, and it was all done on a DA But I am not at liberty to discuss anything else at this time. I know, everyone is going to hate me now "
and
Quote:
Originally Posted by ColonelCash
umm....do you have a new product or machine that we should know about? Was this done with a G100 by any chance?
Still doing some testing for this company. When it's ready, I'm sure you'll see it for saleNOTE: Post count does not reflect actual detailing knowledge.
Comment
Comment