I understand that this wax is meant to be quick drying. Does anyone know exactly how quick drying it is?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
D150 X-Press Liquid Wax Drying Time
Collapse
X
-
Re: D150 X-Press Liquid Wax Drying Time
I've never used it before, but assuming that you apply it thin, by the time you get all the way around the car, your first panel will probably be ready to wiped down.
Always do the finger swipe test before you start removing the product.
I once put swirls in my paint just to see what it looked like.
I don't always detail cars, but when I do, I prefer Meguiar's.
Remove swirls my friends.
-
Re: D150 X-Press Liquid Wax Drying Time
Originally posted by Andrew C. View Postassuming that you apply it thin, by the time you get all the way around the car, your first panel will probably be ready to wiped down.Michael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
Comment
-
Re: D150 X-Press Liquid Wax Drying Time
X-Press Liquid Wax also says you can wipe it off wet, if you wish and it will still leave some wax. However, just like D151 I believe you will get better protection if you let it dry before wiping.
Comment
-
Re: D150 X-Press Liquid Wax Drying Time
I find that exceptionally thing application is a must with this product, or it will need a TON of effort to remove.James - 1979 Oldsmobile Cutlass Calais
Calais Auto Detailing
CalaisDetails@aim.com
www.calaisdetailing.com (under construction)
Comment
-
Re: D150 X-Press Liquid Wax Drying Time
definitely agree that this product dries quick and is a PITA to remove once let set for more than a minute .. yes 60 seconds.
This product has no use in my arsenal and even for my "quick waxes" i would rather use UQW as it has higher gloss and the hydroP properties
Just my 2 cents
Comment
Comment