Please post questions to the forum...

[Mike Phillips]

Re: Please post questions to the forum...

***Bump***

Getting lots of e-mails today with "How-To" questions...

Can't type for two eyeballs, the entire purpose of the forum is to post questions here, not send them to me for an individual reply.

Not enough time.

Sorry...

[zoie]

Mike...Are you ever in Toronto, Canada?

Hi Mike,

I am new to the forum. Just wanted to know if you are ever in Toronto, Canada for open classes? If not, is their a representative in Toronto I can contact? Thanks

[great adventure]

Re: Please post questions to the forum...

hi mike

I have got one question for you..

I been using the diamound cut with wool pad, machine glaze with foam pad
and hi-tech yellow wax for finishing by hand..

what type of detailer shall i use (to clean the car surface) between the diamoun cut and the glaze??
or between the glze and hi-tech yellow wax to gain pefect shining

thank you

[Mike Phillips]

Re: Please post questions to the forum...

hi mike

what type of detailer shall i use (to clean the car surface) between the diamoun cut and the glaze??

or between the glze and hi-tech yellow wax to gain pefect shining

thank you

Any quick detailer you like, they all work great.

[great adventure]

Re: Please post questions to the forum...

did any one used this machine with mequair's polish

do you recommend me the below mentioned machine for polishing
i already got the rotary makita polisher also.


toolbarn.com/product/makita/bo6040

[Commercial links are not allowed; Thanks, 2hotford]

[Ozzie]

Re: Please post questions to the forum...

I would like to reserve a Saturday in 2007 for a Detailing Day for a club. How/where/who do I ask?

[Mike Phillips]

Re: Please post questions to the forum...

I would like to reserve a Saturday in 2007 for a Detailing Day for a club. How/where/who do I ask?

Send me an e-mail with this in the subject line,

***Class Request***

[Paul S]

Re: Please post questions to the forum...

Mike I'm guilty as charged. Must be a guy thing , act first then read instructions. Sent PM and then read intro. My PM asked if Meguair's was going to have its booth at this years Barrett Jackson ? Flying to LA the weekend before the auction for a little sightseeing and driving to scottsdale mid-week. Any hints on any must see places or car related events in or around LA? Have been told to check out the petterson museum but I'm open for suggestions.

Paul S.

[ekobodos]

Re: Please post questions to the forum...

hi ....i am about to start a mobille job whith datailing and car waxing ,What do i have to be carefull for?
is there any future in this kind of job? because i really love cars

[Mike Phillips]

Re: Please post questions to the forum...

hi ....i am about to start a mobille job whith datailing and car waxing ,What do i have to be carefull for?
is there any future in this kind of job? because i really love cars

Well the first thing is to spend some time reading this forum as there's lots of powerful information to be shared. Start here,

The Information Station

Next, anytime you're unsure where to post a question, simply post it in this forum.

Detailing 101

Welcome to Meguiar's Online!

[gorin002]

Re: Please post questions to the forum...

sometimes sometimes writing does`t make it clear
you need to have this class where you show what you mean
if i have a qeustion i post it on the forum

[1flyGTI]

Re: Please post questions to the forum...

Sorry Mike - my apologies.

[mpl]

Re: Please post questions to the forum...

New to the form but not to Meguiars products which I have enjoyed for years.
Recently purchased '07 Corvette Convertible (first one) in Silver and interested in knowing what products to use on exterior and interior. Vehicle is garaged during winter months, but want to begin with using all the right products to maintain show room finish.
TU
MPL

[Bill Prentice]

Re: Please post questions to the forum...

Mike

Sorry for the direct email... I just wasn't sure where to post my question...

Where can I get one of those xenon lights for seeing the swirls... I see Joe (Superior Shine) uses it regularily and noticed you appearing to use one at one of the clinics...

Is there an online source?

Again my apologies for not following the rules... I'm the type that usually learns the hard way, at least so my wife says.

Bill P.

[Sydster]

Re: Please post questions to the forum...

Hi Bill! If you are talking about the hand held Xenon light you can just make a search for Brinkmann Maxfire Lights or just Brinkmann. There is one at Amazon for $30, but I believe if you look really hard or get it from your local store you can get it for as low as $20.