Tweet
I have an old Porta Cable buffer and was wondering if the Meguiar's polishing pads would work on the PC backing plate.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Buffer Pads
What backing plate is on the tool now? -
Re: Buffer Pads
A picture of the plate, the diameter of the plate, or the exact model of the backing plate will help us to confirm your question. Also, are you referring to our 5 " Soft Buff DA Foam Discs?
Here are a couple threads for reference which can also help with your questions:
Backing Plates - More than just a way to stick a pad to a buffer
Meguiar's Soft Buff DA Foam Discs
Hope this helps.
NickNick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA
nawinn@meguiars.comComment
-
Re: Buffer Pads
The plate is 6" and uses Velcro.Comment
Comment