• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

First boat detailing questions

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    First boat detailing questions

    Hey guys just purchased my first aluminium boat and am after some advice on how to spruce it up a bit.




    upload my photo

    As you can see the boat has lost its shine, so I was looking to restore its shine a little bit. Does not have to be a mirror finish or anything. I know people say you shouldn't do this as you are removing the oxidation layer that protects the aluminium underneath, but surely it can't hurt the boat that much? And surely a regular coating/application of sealant could protect it from further oxidation?

    Also I was going to clean and wax the outboard to protect it from sun damage, any recommendations on products to use for this? Was just going to use the Ultimate Liquid Wax that I use on my car, but not sure if I should or not.

    Cheers guys
    Tags: None
  • #2
    Re: First boat detailing questions

    Welcome to Meguiar's Online! So there are really a couple different ways to look at this. If this is an un-coated aluminum, the use of a metal polish, compound or potentially even a mild cleaner/wax product will potentially significantly change the look of this boat into a very high polished appearance, almost like chrome. From my experience it is kind of tough to get somewhere in between.

    We do have products in our Marine/RV Line which are intended to clean this type of surface but are also intended only to brighten, not necessarily polish it up to a high gloss, which in many cases is preferred. Information on these products can be referenced at the following below links:

    M195 Pontoon Series Aluminum Cleaner

    M196 Pontoon Series Aluminum Protectant

    Here are also a couple videos highlighting these products:




    Nick Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com

    Comment

    • #3
      Re: First boat detailing questions

      So this was the sort of shine I was after. Not a mirror finish, but something that looks similar to the 'new boat' aluminium shine.



      Would the aluminium pontoon cleaner achieve this sort of affect? If so, how much would I need in order to clean the whole 14ft boat?

      And what should I use to clean and wax the outboard with?

      Comment

      Previous template Next
      Working...
      X
      gtag('config', 'UA-161993-8');