Results 1 to 2 of 2

Thread: Pictures from Meguiar's April 8th, 2017 Saturday Detailing 101 Class

          
  1. #1
    Product & Training Specialist |MOL Admin Nick Winn's Avatar
    Join Date
    Sep 2010
    Location
    Irvine, CA
    Posts
    4,458
    Rep Power
    52

    Pictures from Meguiar's April 8th, 2017 Saturday Detailing 101 Class

    Good size class for another Meguiar's Garage Saturday Detailing 101 session. It never gets old for us sharing information on car care & our products.



    After our classroom portion of the class, we move out into the garage to demonstrate the information & techniques we just covered on the hood of an attendants vehicle. Today is a I believe 2013 Mitsubishi Outlander. We started by using our Ultimate Waterless Wash & Wax, an alternative to traditional washing, to safely remove all loose contaminants on the vehicle.





    Next we evaluate the paint for above surface contaminants, by using our hand to physically feel the paint. This car was not too bad, but it was rough, so it needed to be clayed.



    We used our Smooth Surface Clay Kit to remove all the present above surface contaminants, essentially contaminants washing doesn't remove.





    When a car is in the shade, no light is reflecting off the paint, thus we typically unable to see if any defects are present. Next we use good lighting, in this case, a combination of the 3M Sun Gun, Florescent lights in our garage, & direct sunlight, to inspect for any below surface defects like swirls, scratches, or stains.







    See the difference even this cloud coverage can make when trying to evaluate for below surface defects. In the below picture, the defects are slightly hidden.



    With the cloud out of the way, we can now get a true idea of the condition of the paint.







    We didn't realize when we selected this vehicle, but the customer had applied touch up paint to several chips on the hood. The below picture shows the touch up paint spots..more on that later.



    We explained how performing a test spot is recommended. Typically a good start is using Meguiar's Ultimate Polish applied on our DFP5 Soft Buff DA Yellow Polishing Disc. A vehicle with this level of moderate defects, it is fair to say we are going to need Ultimate Compound applied on a DFC5 Soft Buff DA Red Foam Cutting Disc. We used this combination on our MT300 Dual Action Polisher, at 5800 OPM's, moderate pressure, moderate arm speed, 4 section passes in each 2 ft square area.





    It looks like we forgot to get a after compound picture, but this combination provided 100% defect removal, and the paint looked like it had been polished & waxed. This is the technology of Meguiar's compounds these days. Older style compounds can leave the paint scoured & hazed. With Meguiar's Super Micro Abrasive Technology (SMAT), most often times the finish looks virtually swirl free.







    Now time for the class attendants to try our MT300 DA Polisher.









    Explaining to class attendants how to approach curves, edges, & contours.





    A quick application of Ultimate Polish applied with our DFP5 Soft Buff DA Yellow Foam Polishing Pad, 4800 OPM's, light to moderate pressure, moderate arm speed, 4 section passes in each 2 ft square area.



    We then applied a coat of our Ultimate Liquid Wax, and then for demonstration purposes applied Meguiar's new Ultimate Fast Finish. (Typically if you were using UFF in this manner, you would want to apply it a full 12 - 24 hours apart from your coat of wax to allow time for the wax to fully cure.)



    We pull the vehicle outside for some direct sunlight shots! Defect free, high gloss & protected shine.







    Thanks to everyone for coming out! For those that attended this class, we would love to hear your experience. Feel free to respond in this thread. Feel free to contact me with any questions.

    - Nick
    Nick Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com
    800-854-8073 ext 3845

  2. #2
    Registered Member evomacky's Avatar
    Join Date
    Jul 2012
    Location
    Anaheim, CA
    Age
    39
    Posts
    82
    Rep Power
    6

    Re: Pictures from Meguiar's April 8th, 2017 Saturday Detailing 101 Class

    It was great experience Nick! I really appreciate what you did and making sure everything was explained in detail.

    Here are some shots I took from that day:


































Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Meguiar's Saturday Detailing 101 Class Sign Up - September 9th, 2017
    By Nick Winn in forum 2017 Sign-up here for Meguiar's Garage Saturday Detailing 101 Classes
    Replies: 26
    Last Post: Sep 9th, 2017, 07:26 AM
  2. Meguiar's Saturday Detailing 101 Class Sign Up - April 8th, 2017
    By Nick Winn in forum 2017 Sign-up here for Meguiar's Garage Saturday Detailing 101 Classes
    Replies: 53
    Last Post: Apr 10th, 2017, 05:34 AM
  3. Pictures from February 11th, 2017 Saturday Detailing 101 Class
    By Nick Winn in forum Pictures from Meguiar's Saturday Detailing 101 Classes
    Replies: 0
    Last Post: Feb 13th, 2017, 08:23 AM
  4. Pictures from January 28th, 2017 Saturday Detailing 101 Class
    By Nick Winn in forum Pictures from Meguiar's Saturday Detailing 101 Classes
    Replies: 1
    Last Post: Feb 1st, 2017, 08:49 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •