• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Quick Detailer M66

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Quick Detailer M66

    Is M66 will remove pervious rotary hologram or I should go first with M205 first.

  • #2
    Re: Quick Detailer M66

    It depends on how severe the rotary holograms are and also which machine you are applying the M66 Quick Detailer with. Typically holograms inflicted from a foam pad on a rotary are more difficult to remove than ones inflicted from a wool pad.
    Nick Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com

    Comment


    • #3
      Re: Quick Detailer M66

      Originally posted by Nicholas Winn View Post
      It depends on how severe the rotary holograms are and also which machine you are applying the M66 Quick Detailer with. Typically holograms inflicted from a foam pad on a rotary are more difficult to remove than ones inflicted from a wool pad.

      I'm planing to use Flex rotary with finishing or polishing pad with M66. Is that sounds good or you prefer other approach.

      Comment


      • #4
        Re: Quick Detailer M66

        Originally posted by mohebmhanna View Post
        I'm planing to use Flex rotary with finishing or polishing pad with M66. Is that sounds good or you prefer other approach.
        A rotary & M66 applied with a foam polishing or finishing pad should have the ability to remove very light previously inflicted holograms, again just depends on the severity of the holograms. If you are looking for a one step approach, our D151 Paint Reconditioning Cream will provide more cut & defect removal especially when used on a rotary.
        Nick Winn
        Product & Training Specialist | Meguiar's Online Forum Administrator
        Meguiar's Inc.
        Irvine, CA
        nawinn@meguiars.com

        Comment


        • #5
          Re: Quick Detailer M66

          M66 with a PC is a great jeweling product.

          Tuck91 uses/used it a lot with awesome results. As well as I.....
          Philippians 2:14 - Do all things without grumbling or questioning,

          Comment


          • #6
            Re: Quick Detailer M66

            Thanks- I used M66 with DA/finishing pad last weekend and I like the result on black car.

            Comment

            Working...
            X
            gtag('config', 'UA-161993-8');