Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22

Thread: Meguiar's Keep Clear Headlight Coating

          
  1. #21
    Registered Member roushstage2's Avatar
    Join Date
    Jun 2005
    Location
    The Real NorCal
    Posts
    4,001
    Rep Power
    140

    Re: Meguiar's Keep Clear Headlight Coating

    Here are a couple of edited (to help show the damage) photos of the current, 15 year old factory lights. The driver's side is actually worse than the pictured passenger side.


    Here's one with the hood open where you can see a half/half:


    Here's the new ones with two good coats of Keep Clear:




    One tip I'd suggest would be to have a can of compressed air on hand to blow the lens off well after wiping it down. I cleaned the first lens and then quickly blew on it, but there was still some a couple of contaminants on the lens that were coated over. I spent a little extra time on the next to avoid the issue. All the dust on the lens in these pictures is on the surface after it had dried already. The coating is still tacky on the rubber trim piece, but hopefully it'll help out as the trim on the aftermarket lights tends to fail sooner than later.

    I'm happy with the product thus far!


  2. #22
    Product & Training Specialist Nicholas Winn's Avatar
    Join Date
    Sep 2010
    Location
    Irvine, CA
    Posts
    2,809
    Rep Power
    35

    Re: Meguiar's Keep Clear Headlight Coating

    Quote Originally Posted by roushstage2 View Post
    One tip I'd suggest would be to have a can of compressed air on hand to blow the lens off well after wiping it down. I cleaned the first lens and then quickly blew on it, but there was still some a couple of contaminants on the lens that were coated over. I spent a little extra time on the next to avoid the issue. All the dust on the lens in these pictures is on the surface after it had dried already. The coating is still tacky on the rubber trim piece, but hopefully it'll help out as the trim on the aftermarket lights tends to fail sooner than later.

    I'm happy with the product thus far!
    Just realized I haven't responded to this. Thanks for sharing! The lights look great!
    Nicholas Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com
    800-854-8073 ext 3845

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Headlight clear bra vs UV protection products
    By KidDetailer in forum Detailing 101
    Replies: 3
    Last Post: Jan 26th, 2015, 02:50 PM
  2. RSX Headlight Won't Clear Up
    By imjuspiayin in forum Headlight Restoration & Clear Plastic Detailing
    Replies: 3
    Last Post: Feb 4th, 2012, 10:31 AM
  3. Headlight Lens Restoral using Meguair's Pro kit and a 2 part wipe on coating.
    By Innovative Detailing in forum Headlight Restoration & Clear Plastic Detailing
    Replies: 9
    Last Post: Apr 11th, 2011, 08:06 AM
  4. Clear Coating Rims?
    By Suprem01 in forum Working by Hand
    Replies: 6
    Last Post: Mar 31st, 2008, 08:31 AM
  5. Clear Coating Custom License Plate
    By coredump in forum The Break Room
    Replies: 3
    Last Post: Oct 26th, 2006, 07:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •