Results 1 to 2 of 2

Thread: Pictures from October 13th, 2016 Thursday Night Open Garage

          
  1. #1
    Product & Training Specialist |MOL Admin Nick Winn's Avatar
    Join Date
    Sep 2010
    Location
    Irvine, CA
    Posts
    3,826
    Rep Power
    45

    Pictures from October 13th, 2016 Thursday Night Open Garage

    First project up for our final TNOG of 2016, a perfect demonstration car, a 2016 Ford Mustang rental car. Why are rental cars typcially great for demonstrating our products?! Scroll down!



    Heavy swirls, scratches, stains, all types of below surface defects or defect "within" the clear coat paint.





    We first started by removing the light dust with our Last Touch Spray Detailer and then used our C2000 Professional Mild Detailing Clay to remove the rough feeling above surface contaminants.



    We ended up using this rental car to get some users familiar with using our MT300 DA Polisher. We tried both our DA Microfiber Cutting Disc w/D300 DA Microfiber Correction Compound as well as our DFC5 Soft Buff DA Foam Cutting Disc with D300. Our microfiber system ended up removing the deep scratches quicker. We then followed with our M205 Ultra Finishing Polish on our DFP5 Soft Buff DA Foam Polishing Disc, and then our M21 Synthetic Sealant 2.0 on our DFF5 Soft Buff DA Foam Finishing Disc.



    Michael Stoops give a lesson in working tight areas with our MT300.





    Tommy tested some combination on the hood his Mercedes Benz.



    More tight space DA Polishing.



    We had two users who had never used a dual action polisher before, and in about 10 minutes of instruction, they were mowing through defects with ease with our MT300 and DA Microfiber Correction System.



    M21 Synthetic Sealant 2.0 drying



    And the final results!









    One last project for the night, this 2012 BMW had a decent scratch in the hood. What we found upon performing a test spot was that the paint on this car was very resilient. Michael Stoops used our M101 Foam Cut Compound on our DMC5 Microfiber Cutting Disc quite a few times but made a awesome improvement.





    Before



    And after, you can just barely see the scratch in the reflection of the fluorescent lights.



    Thanks to everyone for coming out!
    Nick Winn
    Product & Training Specialist | Meguiar's Online Forum Administrator
    Meguiar's Inc.
    Irvine, CA
    nawinn@meguiars.com
    800-854-8073 ext 3845

  2. #2
    Registered Member Selectchoice's Avatar
    Join Date
    Sep 2008
    Location
    Sydney, Australia
    Posts
    1,253
    Rep Power
    21

    Re: Pictures from October 13th, 2016 Thursday Night Open Garage

    Great work and brilliant educating guys!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Pictures from Thursday Night Open Garage - October 30, 2014
    By Michael Stoops in forum Pictures from Meguiar's Thursday Night Open Garage Classes (TNOG)
    Replies: 2
    Last Post: Nov 6th, 2014, 06:13 PM
  2. Pictures from Thursday Night Open Garage - October 16, 2014
    By Michael Stoops in forum Pictures from Meguiar's Thursday Night Open Garage Classes (TNOG)
    Replies: 1
    Last Post: Oct 26th, 2014, 05:55 PM
  3. Pictures from Thursday Night Open Garage - October 2, 2014
    By Michael Stoops in forum Pictures from Meguiar's Thursday Night Open Garage Classes (TNOG)
    Replies: 8
    Last Post: Oct 21st, 2014, 01:16 PM
  4. Pictures from Thursday Night Open Garage - October 13th, 2011
    By Michael Stoops in forum Pictures from Meguiar's Thursday Night Open Garage Classes (TNOG)
    Replies: 1
    Last Post: Oct 14th, 2011, 01:21 PM
  5. Pictures from Thursday Night Open Garage - October 1st, 2009
    By Michael Stoops in forum Pictures from Meguiar's Thursday Night Open Garage Classes (TNOG)
    Replies: 2
    Last Post: Oct 7th, 2009, 12:03 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •