Buffing Pads

[rusty bumper]

Hi all,

Has Meguiar's discontinued their W7006, W8006, and the W9006 foam buffing pads? If so, what replaced them, and can the replacements be used with a W-64 DA baking plate?

Sorry, I've been out of the loop for some time now and need refreshing.

[The Guz]

Re: Buffing Pads

These are the new foam pad replacements

NEW! DA Foam Discs and Backing Plates

[rusty bumper]

Re: Buffing Pads

These are the new foam pad replacements

NEW! DA Foam Discs and Backing Plates

Thanks, Guz!

That's a lot of information to digest at one time. Can my backing plate be used for these new low profile pads? I'm assuming they will work?

[The Guz]

Re: Buffing Pads

It should work fine.

[rusty bumper]

Re: Buffing Pads

It should work fine.

Thanks again, Guz!


What is the velcro ID of the 5" and 6" pads? I understand the backing plate sits closer to the edge of the newer pads.

[The Guz]

Re: Buffing Pads

The hook and loop is exactly 5" for the 5" pads. I would think the same goes for the 6" pads. I only own the 5" pads.

[rusty bumper]

Re: Buffing Pads

Good enough.

Thanks!