I have the Porter Cable 7424 and Meguiars W64DA backing plate. My old Soft Buff 6.5" pads are needing replacement. Am I ok to use the newer Soft Buff DA Foam Polishing/Finishing pads in Disc - 6" MEG DFP6 with my current backing plate?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Backing plate and pad question
Collapse
X
-
Re: Backing plate and pad question
Really your best bet would be to get a 5 inch backing plate and start using Meguiars 5 inch pads.
The difference will transform the machine. I own a 7424 and use a 5/5 system, plus the 3 inch backing plate. I also own a Flex
-
Re: Backing plate and pad question
Agreed. Now is a good time to upgrade to a 5 inch backing plate and the 5" foam discs.
Comment
-
Comment
Comment