Tweet
I used scratchx on two spots by hand and now the finish is dull and cloudy. I applied coat of NXT wax and still cloudy. Would 205 help? I feel I made area worse than what it looked like w scratch. Thanks!
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Finish Cloudy Where I Used ScratchX
Hi 15BlueChallenger,
What did you use to apply our ScratchX? Was this our Scratch X 2.0 version? Usually when we hear of someone having an issue applying our Scratch X 2.0 by hand it is often related to what the product is being applied with. Cotton Terry Cloth Towels, Microfiber Towels, and sometimes even microfiber applicator pads on certain darker paints can leave a bit of haze. This is often remedied by simply re-applying the product with a clean soft foam applicator pad like our X3070 Soft Foam Applicator Pad.Nick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA
nawinn@meguiars.com -
Re: Finish Cloudy Where I Used ScratchX
Thank you for the reply. I used a microfiber towel. Yes it was 2.0 version. I will re-apply with a foam applicator and see if it does the trick. Thanks again!Comment
-
Re: Finish Cloudy Where I Used ScratchX
I did my entire black car with scratchx 2.0 and it came out unbelievably clear. Its like a black mirror now. It has some serious correction ability , I used a da polisher though with the proper pads maybe that made the diffrenceComment
-
Re: Finish Cloudy Where I Used ScratchX
By hand, how long do you work the Scratch X 2.0 product into the painted surface for best results? I tend to use a erical/ hotizontal cross pattern, is this the best practice?Comment
Comment