Tweet
Our first project for the night was this 2006 Pontiac which upon evaluation needed some assistance!
We first used a clay bar to remove the bonded contaminants.
We used the fluorescent lights in our garage and a few different LED lights to evaluate the color. Based on the amount of swirls, scratches, and overall lack of clarity, we choose our DA Microfiber Correction System.
The left side of this hood in this picture you can see the reflection of the scratches and lack of clarity, the right side is just after the DA Microfiber Correction Compound & DMC5 step, with our MT300 Dual Action Polisher, at speed 5800 OPMs with 4 moderate pressure section passes.
We then got the car owner his hands on using a DA and emphasized to keep in mind machine pressure, pad rotation, arm speed, and pad angle.
We did not plan on working on other areas of the car but with a slower night we needed something to do! When we asked the car owner Jorge if he was OK with that he happily agreed!
And here we go! Five MT300's running at once!
I was happy to see allenk4 decided to do his own 50/50 on the back of the car because it made for some great pictures.
Just a little difference!
Thanks to everyone for coming out!
We first used a clay bar to remove the bonded contaminants.
We used the fluorescent lights in our garage and a few different LED lights to evaluate the color. Based on the amount of swirls, scratches, and overall lack of clarity, we choose our DA Microfiber Correction System.
The left side of this hood in this picture you can see the reflection of the scratches and lack of clarity, the right side is just after the DA Microfiber Correction Compound & DMC5 step, with our MT300 Dual Action Polisher, at speed 5800 OPMs with 4 moderate pressure section passes.
We then got the car owner his hands on using a DA and emphasized to keep in mind machine pressure, pad rotation, arm speed, and pad angle.
We did not plan on working on other areas of the car but with a slower night we needed something to do! When we asked the car owner Jorge if he was OK with that he happily agreed!
And here we go! Five MT300's running at once!
I was happy to see allenk4 decided to do his own 50/50 on the back of the car because it made for some great pictures.
Just a little difference!
Thanks to everyone for coming out!
Comment