Has anyone tried applying Diamond Cut compound 2.0 #85 by hand. It is recommended for rotory polisher, but can you get a good result? But anyone tried? The reason I asked is because I had good results using Deep Crystal Step 1 Paint Cleaner by had to remove sand paper marks by hand. They discontinue Deep Crystal Step1. I am looking for as sub. thanks
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Dimond Cut Compound 2.0 85 by hand anyone??
Collapse
X
-
Re: Dimond Cut Compound 2.0 85 by hand anyone??
We would not recommend using our M85 Diamond Cut Compound by hand. It is designed only for rotary use. Meguiar's M105 Ultra Cut Compound can be used by hand, D/A or Rotary.
Meguiar's M105 Ultra Cut CompoundNick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA
nawinn@meguiars.com
-
Re: Dimond Cut Compound 2.0 85 by hand anyone??
Originally posted by Nicholas Winn View PostWe would not recommend using our M85 Diamond Cut Compound by hand. It is designed only for rotary use. Meguiar's M105 Ultra Cut Compound can be used by hand, D/A or Rotary.
Meguiar's M105 Ultra Cut Compound
Comment
-
Re: Dimond Cut Compound 2.0 85 by hand anyone??
Agreed. UC is far more powerful than DC.Originally posted by BluelineI own a silver vehicle and a black vehicle owns me. The black one demands attention, washing, detailing, waxing and an occasional dinner out at a nice restaurant. The silver one demands nothing and it looks just fine. I think the black vehicle is taking advantage of me, and the silver car is more my style. We can go out for a drive without her makeup and she looks fine. If I want to take the black one out, it is three or four hours in the "bathroom" to get ready.
Comment
-
Re: Dimond Cut Compound 2.0 85 by hand anyone??
Originally posted by Selectchoice View PostIf you were able to remove sanding marks with the Deep Crystal Paint Cleaner (which is a very mild product comparatively), I'm surprised you are having a problem with Ultimate Compound. What grit sanding paper are you finishing with?
Comment
-
-
Re: Dimond Cut Compound 2.0 85 by hand anyone??
Originally posted by bluetiger View PostHow does the M105 compare to the Ultimate Compound (I know this is a consumer product). I have that one already. The Ultimate compound does not seem to remove the mat finish from sand paper like the Deep Crystal Step 1 did by hand. Can you add more info on this. thanksOriginally posted by bluetiger View Post2000Originally posted by bluetiger View PostJust to make sure. I am not talking about the current DC (have not used that one yet). The DC I am talking about is the Step 1 DC.Nick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA
nawinn@meguiars.com
Comment
Comment