• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

M20 question

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    M20 question

    I just put down a coat of M20 on my car. I was wondering how much time I should allow before I lay down a second coat of wax---not M20 (I know the cleaners in it would probably remove the first coat) but a wax like Wolfgang Fuzion. 30 minutes? 1 hour? 4 hours? 12 hours? Does it matter?

    TIA.

    ~ Al
    Swirls hide in the black molecular depths, only waiting for the right time to emerge and destroy your sanity.
    --Al Kimel
    Tags: None
  • #2
    Re: M20 question

    This is where you can start getting into the whole 'layering' debate.

    I would say it doesn't matter.

    Fuzion is probably the more durable of the two (I think), so you really want Fuzion's properties, so it doesn't matter if the protection from M20 remains or not IMO.

    If you were topping with a less durable LSP (a pure carnauba for example), I'd say wait 12 hours.
    Originally posted by Blueline
    I own a silver vehicle and a black vehicle owns me. The black one demands attention, washing, detailing, waxing and an occasional dinner out at a nice restaurant. The silver one demands nothing and it looks just fine. I think the black vehicle is taking advantage of me, and the silver car is more my style. We can go out for a drive without her makeup and she looks fine. If I want to take the black one out, it is three or four hours in the "bathroom" to get ready.

    Comment

    Previous template Next
    Working...
    X
    gtag('config', 'UA-161993-8');