Tweet
Hi, how can i remove ultimate interior detailer from plastic. I usually use QID but i thought I would give this a try but it's a little to shiny for me?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
APC should do the trick; -
Re: How to remove UID from plastic
Even regular QID may just knock the shine down.2017 Subaru WRX Premium - WR BlueComment
-
-
Re: How to remove UID from plastic
Try taking a clean cotton terry cloth towel and wetting it thoroughly with very warm water. Wring it out, then wipe the surface down with that. UQID is water based, and a good warm water wipe down with a terry towel should remove it. If you applied it a bit heavy you may need a couple passes with the warm, damp towel.Michael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
Comment
-
Re: How to remove UID from plastic
Many thanks for your help
Comment
-
Re: How to remove UID from plastic
Thank you for this answer as I was looking for the same solution.Comment
Comment