Last night we showed our new product lineup at a special edition of TNOG. By far the most anticipated product among those present was our new Paint Protect, but everyone seemed pretty wowed by the new Perfect Clarity Headlight Restoration Kit and the new DA foam discs. Of course the MT300 was pretty popular, too!
Our subject headlight. It's actually a lot worse than this image indicates.
From a different angle, taped for demo. It's easier to see the level of oxidation and yellowing present from this angle.
Scuffing in straight lines with the included scuffing solution and pad.
A nicely scuffed, frosted looking lens.
No polishing, no rubbing.... just spray the UV protective clear over the scuffed lens. By the way, this product is ATSM Certified to protect against UV for at least 12 months.
After a couple more coats.... done.
Half and half shows the improvement, with no buffing and very little effort overall.
Bob was kind enough to donate his BMW Z4 for the guys to use the new MT300 DA polisher on, along with the new pads.
Paul is one handing the MT300 while applying Paint Protect to the Z4. We applied a very small amount of Paint Protect to the pad and it just kept spreading and spreading.
There were plenty of cameras out last night so please feel free to add your own images, or at least your thoughts about last night, by posting to this thread.
See you all next year!!
Our subject headlight. It's actually a lot worse than this image indicates.
From a different angle, taped for demo. It's easier to see the level of oxidation and yellowing present from this angle.
Scuffing in straight lines with the included scuffing solution and pad.
A nicely scuffed, frosted looking lens.
No polishing, no rubbing.... just spray the UV protective clear over the scuffed lens. By the way, this product is ATSM Certified to protect against UV for at least 12 months.
After a couple more coats.... done.
Half and half shows the improvement, with no buffing and very little effort overall.
Bob was kind enough to donate his BMW Z4 for the guys to use the new MT300 DA polisher on, along with the new pads.
Paul is one handing the MT300 while applying Paint Protect to the Z4. We applied a very small amount of Paint Protect to the pad and it just kept spreading and spreading.
There were plenty of cameras out last night so please feel free to add your own images, or at least your thoughts about last night, by posting to this thread.
See you all next year!!
Comment