Tweet
2006 Jeep liberty - M105/M205 and ULW topped with M26 and M135.
Updated Current.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: 2006 Jeep liberty - M105/M205 and ULW topped with M26 and M135.
-
Re: 2006 Jeep liberty - M105/M205 and ULW topped with M26 and M135.
Always nice to see a well done white vehicle
"STRIFE" aka Phil
2005 Infiniti G35 Coupe (IP/ aka White) the Toy
2011 Subaru Impreza (SWP/ aka White) the DD
2017 Subaru Forester (CWP/ aka White) Wifey'sComment
-
Re: 2006 Jeep liberty - M105/M205 and ULW topped with M26 and M135.
Originally posted by STRIFE View PostAlways nice to see a well done white vehicle
Thanks.
And people say white doesn't show.Comment
-
Re: 2006 Jeep liberty - M105/M205 and ULW topped with M26 and M135.
That's clean! Great work on the whole car. The product combo is fantastic.
Wish I could rub up the paint and feel the slickness hehe.Comment
-
Re: 2006 Jeep liberty - M105/M205 and ULW topped with M26 and M135.
Nice job jankerson ! You got some great shine and gloss going on that's for sure
''USE THE LEAST AGGRESSIVE PRODUCT TO GET THE JOB DONE RIGHT''
You Don't Know What You Can Do Until You Try '' TECHNIQUE IS EVERYTHING''
Test Hoods Are Cheap And Most Of The Time Free
Comment
-
Re: 2006 Jeep liberty - M105/M205 and ULW topped with M26 and M135.
Thanks guys.
Comment
Comment