I've been doing more wet sanding lately and am looking to change up my process to move a little quicker. My current process is 1000 by hand, 1500 by hand, then 3000 foam disc via PC, then compounding with rotary/wool/M105. This seems to work well but leaves straight tracers behind as I don't believe the 3000 foam disc has enough cut to really pull out the 1500 sanding marks.
I experimented a little and followed the 1000 grit by hand with 1500 film disc by PC and this worked really well as I didn't have any straight tracers to remove....however I had to chase pigtails from the 1500 film disk for a while.
I want to change up the process to 1000 by hand to knock out the orange peel, then try 1500 film disc followed by either a 1500 foam finishing disc or a 3000 foam finishing disc. I believe this process would buff out pretty well, but I'm not clear which would be the best disc to follow the 1500 film.
Please comment if you have experience
Comment