Hey guys, i am just trying to finalize what products to use to finally tackle the oxidized single stage acrylic enamel on my summe car.. A little backround, it is red, about 9 years old and quote dull and noticeable fading. My plan is to use the PC DA.
I now the "least agressive method first" is ofter recommended but with the amount of dullness and fading i figured it will likely take a bit of effort. I know the UC/UP are newer and possibly a better finish due to their technology but i am just wondering if the UC is going to be too aggressive....i hear it takes off a lot of paint which makes me nervous with the single stage. On the other hand, startinig with the UP i am thinking might be too light to take of the fading etc??
Would the 83 or 80 be a better bet with this paint and then follow with M7? Would it be best to try the M80 first and see what happens? The only thing i am curious about the "least aggressive first" is say if you use M80 and then 83 (becuase it didn't take off enough) then you are actually worse off then if you just used M83 in the first place, correct?
Any advice would be helpful.