Going to fix a small rock chip on my bumper. I was just wondering how long I should wait to apply the clear coat after the touch-up paint?
Should I wait 24hrs or is it safe to apply the clear coat an hour after the last coat of touch-up paint ?
Thanks
Chip repair usually deals with such a small amount of paint that the clear can usually be applied after just a few hours. If you're using a two part system specifically for chip repair there should be some instruction on this point. What's more critical, though, is that you allow sufficient dry time for the clear before spot sanding and buffing it out, if that's the process you're using.
Michael Stoops
Internet Technical Specialist | Meguiar's Inc.
(800) 854-8073 xt 3875
mstoops@meguiars.com
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
Please post technical questions directly to the forum rather than emailing or PM-ing me. You will get a faster response on the forum, and your question could help someone else, too!
Has anyone tried this
http://www.automotivetouchup.com/store/paint_pens/paint_pen_matched.aspx
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote