Need help with these headlights!

[avman1987]

So my headlights look fine in the light but at night with the headlights are on they look like this(hopefully I can get this picture thing to work). I have used PlastX on them they feel very smooth and they look perfectly clear during the day. Any ideas? You can see them here if the pic doesn't work- http://s1061.photobucket.com/albums/t468/avman1987/

[SVT Lightning]

Ya Know....that almost looks like condensation on the inside. I've had good luck using UC on headlights FYI.

[avman1987]

Yeah it kind of does look like that but up close with the lights on you can tell its on outer part of the plastic. Thanks for the reply.

[ronniejay]

bookmark.

[HCAD]

If you went over the light with PlastX and saw no improvement, it's likely that the flaws are IN the plastic and not on the outside. Have you noticed the lights on another car, same model? Maybe it's in the design of the cars lights themselves? If you still want to try a more aggressive approach, I'd advise taking it to a detailer who can access 1000 grit paper, or 3000 grit on a drill, and then be able to buff out the sanding marks.

[GhOsT1321]

Before taking it to a dealer, I would give this a shot. For $10 you don't have much to lose versus paying a dealer.
http://www.harborfreight.com/12-minu...kit-65938.htmt
The sand paper is quite fine, but you may be able to sand through the defect if you work it long enough.

[Michael Stoops]

So these feel totally smooth on the outside? You don't feel any sort of roughness, or can't see anything that looks like fine pitting on the outside when the lights are off? How old is the car, and have the lenses always appeared this way or are you noticing that this condition is worsening with time?

[avman1987]

Yes they feel totally smooth on the outside, no roughness but I can see some small marks that look like rocks have hit (not nearly as much as in those pics though). I uploaded a pic in the day without the lights on if you would like to see that. It is an 04 and I am not sure I have used PlastX for a while on them just to keep them their best but the other night I was parked in front of a store and I noticed that in the reflection for the first time. I have all the stuff to sand and buff them and I have done it on another car but I was just hoping I didn't have to.

[avman1987]

Here is the day and night (lights on/off)

[GhOsT1321]

Could the headlights have dust on the inside?
You could take the bulb holder assembly out and try to blow the inside out with compressed air.