I recently purchased a gallon jug of M34 Final Inspection. My original intent for the product didn't pan out and aside from it's obvious use as a final wipe/QD can it be used for a clay lube as well? I'm aware of UQD not being suitable for claying but can M34 be used for this?
What were you trying originally?
And yes, it is fine as a clay lube, would be used at full strength.
'08 Subaru Legacy 2.5i SE - Newport Blue Pearl
I was working on problems with Ultimate Wax.
Works great as QD for wheels too!
I once put swirls in my paint just to see what it looked like.
I don't always detail cars, but when I do, I prefer Meguiar's.
Remove swirls my friends.
QD on the wheels, general purpose QD, clay lube, removing compound residue during the buffing process, etc. It's good for all of this.
Michael Stoops
Internet Technical Specialist | Meguiar's Inc.
(800) 854-8073 xt 3875
mstoops@meguiars.com
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
Please post technical questions directly to the forum rather than emailing or PM-ing me. You will get a faster response on the forum, and your question could help someone else, too!
I use it for lubricating my pad when i am doing polishing work..
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote