Internet Technical Specialist | Meguiar's Inc.
(800) 854-8073 xt 3875
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
Please post technical questions directly to the forum rather than emailing or PM-ing me. You will get a faster response on the forum, and your question could help someone else, too!
i see that the rotary took has a foam pad to put the wax on, is it best to get a tool with a foam pad. what if we used a microfiber pad? are there any disadvantages/advantages for foam vs microfiber rotary tools / polishers. also what speed was it at in rpms?
I didn't see any rotaries being used to apply wax in these photos.
If you are talking about the photos where Stoops is applying wax to the black car at this TNOG:
The tool Mike Stoops is using is a G110v2 DA equipped with a Meguiar's Soft-Buff 2.0 Black Foam pad.
I believe you might have rotaries and dual action polishers mixed up!
Please check out this thread to clear up any confusion:
This is an excellent thread that should clear up many of your questions!
[A]All my tools can use foam or wool
[B]What will you be doing?
[C]For what application?
[D]I apply wax at a low orbit per minute speed on my G110v2... speed 1 or 2.
More Holograms than the USS Enterprise
There are currently 1 users browsing this thread. (0 members and 1 guests)