Results 1 to 6 of 6

Thread: Lady in Red.....Ferrari California , paint correction

          
  1. #1
    Service Luxury and Exotics Cosmin's Avatar
    Join Date
    Mar 2009
    Location
    Austin , texas
    Posts
    352
    Rep Power
    14

    Talking Lady in Red.....Ferrari California , paint correction

    *A big THANK YOU to MobileJay and Jesse (Apollo_Auto), for their moral support
    Brand new car , but with defects from factory ... Haze! BIG TIME!
    At first look the car finish looks "perfect", but is not.
    Mission: Focus on Paint, remove haze and light swirls , random scratches and deep scratches.
    the car is a daily driver!

    Car got a good jet of water to remove any loose dirt from it, after that the wheels got some foam action , i use a solution with dawn , apc+ and hyper car soap for foam to remove all the previous wax from the paint.
    the wheel walls got some brush action and was dress with 303 protectant. the weels got optimum car wax.





    Foam Action


    The car got dry with blower , 20 minutes



    after dry , i tape most of the panels lines and rubber trims, also the hood, mirrors and front 1/4 panels was clear bra , so got tape too.

    i pull the car inside and use Led lights , halogen and Camera Flash to see the defects , I WAS SCARED! is like a horror movie on such car.








    The first thing i did was to remove 2 scratches from the rear panel , i use some meguiar`s 105 on a microfiber towel and i rub it by hand till disappear and i fallow with dual action polisher with polish pad and meguiar`s 205





    Next step was some random scratches on driver door where i use Meguiar`s 105 and polish pad fallow by meguiar`s 205 on polish pad
    all with dual action polisher.here is the before/after pic




    everything else got 1 or 2 passes with meguiar`s 205 on polish pad.






    When done with polishing i remove all the tape clean windows , and i apply protection: 2 coats of blackfire done with microfiber applicator.
    Clear bra got clean with plexus , and as protection opti-seal , also all the lights got opti-seal.
    Here are the AFTERS , with some sun shots too


















    proreflection

    Detail Luxury and Exotics in Austin area

  2. #2
    Innovative Detailing Innovative Detailing's Avatar
    Join Date
    Oct 2009
    Location
    Orange County California & LHC Arizona
    Posts
    291
    Rep Power
    41

    Re: Lady in Red.....Ferrari California , paint correction

    Very well done!!

    I know first hand that those California's have many paint defects. I remember the project I did for Ferrari of N.A. on four of them and they definately all needed paint correction.

    Awesome Job!

  3. #3
    aka: 23jam J. A. Michaels's Avatar
    Join Date
    Sep 2005
    Posts
    14,243
    Rep Power
    535

    Re: Lady in Red.....Ferrari California , paint correction

    Stunning. Great work. Looks fantastic.
    quality creates its own demand

  4. #4
    Registered Member aris's Avatar
    Join Date
    Apr 2010
    Location
    Ontario Canada
    Age
    37
    Posts
    811
    Rep Power
    16

    Re: Lady in Red.....Ferrari California , paint correction

    Very nice

  5. #5
    ShineTech Auto Detail Hemin8r's Avatar
    Join Date
    Apr 2006
    Location
    Orange County/Los Angeles, CA
    Posts
    1,944
    Rep Power
    68

    Re: Lady in Red.....Ferrari California , paint correction

    Nice!
    Jesse

    2009-2014 Meguiar's/Car Crazy SEMA Team
    www.ShineTechAutoDetail.com
    Facebook www.detailing.com

  6. #6
    Max Brook's Avatar
    Join Date
    Nov 2009
    Location
    Grantsville Utah
    Posts
    134
    Rep Power
    10

    Re: Lady in Red.....Ferrari California , paint correction

    Great job! Imagine that as your daily driver. I watched a Modern Marvels episode on the Ferrari factory in Italy and it's difficult to imagine that given the apparent care they put into building their cars there would be any factory defects--but apparently it happens to some of the best.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Learning to use the Rotary Buffer
    By Mike Phillips in forum How To Articles
    Replies: 18
    Last Post: Apr 29th, 2010, 10:15 PM
  2. What is the meaning of soft paint?
    By Mike Phillips in forum Hot Topics & Frequently Asked Questions
    Replies: 2
    Last Post: Jan 23rd, 2009, 10:23 PM
  3. Some newb qns
    By top_cat87 in forum Detailing 101
    Replies: 7
    Last Post: May 26th, 2006, 09:47 AM
  4. Claying im stuck ??
    By WhiteCamaro88 in forum Detailing 101
    Replies: 4
    Last Post: Jun 21st, 2005, 02:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •