Any ideas on a reasonable air compressor? - found one!

[gb387]

I have been looking for an air compressor for sometime now... Mainly at craftsman, I had one like the first photo got it for a great price but had some problems with and it was WAY to loud/don't need a 2-stage pump... it and ended up returning it.

First Try




I was looking at the one below now, I have decided that I want an oil pump (quieter, I hope) 25-30 gallon and don't want to spend anymore than 375-400. Only thing that I don't like about the one below is that its an aluminum pump. I know Home Depot/Lowes/Menards have some but are they any good, hummm... is sears any good?



Any help/ideas would be great! I am not going to run anything to crazy... the normal stuff a nailer/1/2" impact/rachet and so on.

[travisdecpn]

You may want to look into a brand called Speedaire, IMO, they make the best on the market and are reasonably quiet. I have a 20 gal/2 hp horizontal electric. You may not find one in that price range, but if it's something that you are going to use regularly, you should really look into it. it's about 10 years old now and still runs like new. Here's a link to one that i found at grainger, pretty reasonable at 380 bucks. http://www.grainger.com/Grainger/pro...769006&ccitem=

[Rockpick]

In my opinion, there are varying levels of any brand that you choose. Craftsman makes some pretty top-notch stuff but, I've also used a thing or two bearing the brand that wasn't worth the price of admission to a underwater basket weaving expo.

That being said, I'd choose one from a local store (Sears, Grainger, HD, Lowe's, etc). This will basically allow you to do what you've apparently already done; try it out. Further, it's nice to have a place local that you can simply go back to the store with it if it breaks and request a replacement.

I'm certainly not saying to exploit the return policies of these stores but, many offer you a 'try it out' period and, if you don't like it within that period, you simply bring it back in with the original package contents and receipt and they gladly refund your purchase price.

Also, I might add that if you're just going to be doing some 'simple, around the house' things, I think the smaller unit shown in your original post is more than adequate. Very rarely will you have to stop in the middle of a project and allow the machine to 'catch up' as it will do a fine job making the necessary air for your project. I utilize a similar unit in a separate-phase xylene groundwater recovery system (in a nut shell, this unit pumps xylene out of the ground that got there as a result of a leaky underground tank) and it runs about 12-18 hours per day. While I did have an issue with it once, it's run flawlessly now for about 8 months and, for a unit that size, that's quite a feat.

Good luck with your decision!

RP

[gb387]

Well after a long search I finally found one that I am happy with at Home Depot, Cast Iron Pump, 26 gallon, 135 psi. For what I need just about right. Nice and quiet as well:


If anyothers are looking for one this is a good option better yet its made in the good old USA.

[Buellwinkle]

Looks good. I prefer a stand up one, takes up less floor space. Had an 80 gallon single stage pump, forgot the brand name but I got it at Costco. Everytime it kicked in, the noise was insanely loud. My father had one that was about twice the price and it was half the volume so there's definately a corrolation between price and noise...

[jetta18T]

I have a 15 gallon Craftsman that I just got for Christmas and I think it works great. I only use it for a blow gun and air ratchet right now....until I get more tools. It does seem loud but I just wear hearing protection when I'm outside using it, then the noise really doesn't bother me at all. So for everybody who is bothered by the noise, try investing in some earmuffs...they work great

[c368/2ss]

FOR ALL TO KNOW ,MAYBE YOU KNOW ,MAYBE YOU DONT WHEN USING AIR COMPRESSORS FOR DRYING (ect) make sure you have water/air filter installed @ least 25 feet in to hose line ( theres a lot of ways to do this )f not you will get oil in the line and water and dirt will come onto the surface you are working on. ( ALSO DRAIN IT BEFORE EVERY USE ) THERE IS A LITTLE PIT COK ON BOTTOM OF COMPRESSOR)you can get good ones @ HARBOR FREIGHT at good $$$$$

[gb387]

Originally posted by c368/2ss
FOR ALL TO KNOW ,MAYBE YOU KNOW ,MAYBE YOU DONT WHEN USING AIR COMPRESSORS FOR DRYING (ect) make sure you have water/air filter installed @ least 25 feet in to hose line ( theres a lot of ways to do this )f not you will get oil in the line and water and dirt will come onto the surface you are working on. ( ALSO DRAIN IT BEFORE EVERY USE ) THERE IS A LITTLE PIT COK ON BOTTOM OF COMPRESSOR)you can get good ones @ HARBOR FREIGHT at good $$$$$

Good point, I am going to pick one up for my compressor just haven't yet... but will the filter/separator remove particles as well as moisture?

[Kevin Brown]

I bought the upright Craftsman compressor in the picture.... I love it!

It is VERY quiet and compact. You could put it in a one car garage and hold a conversation with someone without having to raise your voice.... No kidding! If you aren't sure about it, just plug it in at Sears before you buy it (if they have one on display).

I bought one to use in my booth at the Goodguys West Coast Nats, as well as Meguiar's NXTti Seminars. We used it in September at the Vintage Auto Museum (indoors), and it ran a few Mirka Bulldogs without a hitch.

I wouldn't run three all the time, of course... We used them in relatively short bursts, but I am very happy with my purchase. I paid $349.00 plus tax at Sears. It was a Craftsman Club Day, and it was on sale.

Good Luck.

[gb387]

...It was a Craftsman Club Day, and it was on sale.

Thats the way to go when buying from sears.