I am picking up a new PC and was hoping to get information on the Pro line of products since most of my experience is with the Consumer line.
I have been reading alot about how people swear by M83. I have also been reading about the new SMAT products and the results people are getting with M105 and M205.
The quote below is from Mike Phillips' post "Aggressiveness Order for New Consumer Products - This will surprise you!"
Quote:
Am I alright in assuming then that while 205 was formulated to follow 105; I can still use it as a stand alone product? Since the cars I own are in no need for the correction offered by M105.
Should I pick up some M83 and M205? Or would the 205 be better or roughly the same?
I know ultimatly it is trial and see which is best for you but if they are similar products I would rather get a different product like M21 or M06 in addition to one of them, instead of buying both to start.
Thanks in advance.
I have been reading alot about how people swear by M83. I have also been reading about the new SMAT products and the results people are getting with M105 and M205.
The quote below is from Mike Phillips' post "Aggressiveness Order for New Consumer Products - This will surprise you!"
Quote:
NOTE: M205 is specifically formulated and intended to be used with a rotary buffer on fresh paint after the initial cut is made using M105 Ultra Cut Compound. When M105 is used correctly, they may only be some fine swirls left in the paint and this is what M205 is designed to remove. This is our new M105/M205 Tag Team primarily targeted at body shops where technicians are sanding and buffing fresh paint. Of course we know the detailing industry as well as the enthusiast segment of the car hobby will also use these products so we just want to set the record straight as to what these two products are intended to do and who they are primarily target towards. |
Am I alright in assuming then that while 205 was formulated to follow 105; I can still use it as a stand alone product? Since the cars I own are in no need for the correction offered by M105.
Should I pick up some M83 and M205? Or would the 205 be better or roughly the same?
I know ultimatly it is trial and see which is best for you but if they are similar products I would rather get a different product like M21 or M06 in addition to one of them, instead of buying both to start.
Thanks in advance.
Comment