TWO THUMBS UP !!--Meguiar's NXT Tech Institute

[Mike Phillips]

Here's Ken from Detail USA trying his hand at wet sanding with Nikken Finishing papers...



Mike

[Mike Phillips]

Kevin teaching rotary buffer technique to Larry, (aka: m2mazda6), with Bob, (aka RDVT4ME), looking on...




Mike

[Mike Phillips]

Here's Dave trying out the rotary buffer as Kevin watches his pad against the finish,



Mike

[Mike Phillips]

Here's Ken working out some sanding marks with a wool pad,



Mike

[Mike Phillips]

Here's Tolga working with the rotary buffer on polishing techniques,



Mike

[Mike Phillips]

Here's Dave and Luciano both hitting the hood with the rotary buffer, with Larry in the back left and Gary from D & R MotorSports looking on...



Mike

[Mike Phillips]

Here's Jason Rose's Meguiar's Tahoe, looking flawless as it always does!



Mike

[Mike Phillips]

Here's a group shot at taken at the end of the event,



Mike

[Mike Phillips]

Here's a shot of the Instructors for the first NXT Tech Institute Workshop.

From left to right,

Kevin Brown, Jesse Castillo, Jason Rose, Mike Pennington and Mike Phillips

[Mike Phillips]

The Vintage Museum proved to be an awesome setting for our classroom, it gave the entire event a car crazy atmosphere,





Mike

[Mike Phillips]

Red and black car hoods for sanding and buffing on,



Mike

[Mike Phillips]

Here's Jessie at the Mirka Work Station ready to go!



Needless to say, Jessie's booth was very popular with everyone this day,



Mike

[Mike Phillips]

Here's Mike Pennington going over Meguiar's history starting in 1901 with Frank Meguiar Jr. and ending up with where Meguiar's is today over a hundred years later...

[Mike Phillips]

Here's Jason Rose helping Bill by showing him the correct technique for wet sanding by hand.



Mike

[Mike Phillips]

Here's two students doing some hand wet sanding while Dave Pedre, a Meguiar's Sales Manager from Florida watches, (back, left)



Mike