Hello I am new at this. I am in the process of making my recent paint job a lot more glossy finish. I do have orange peel in places and have successfully removed using 1000 1500 2000 Grit wet sanding (in that order). I have seen forums that suggest to do rubbing compound between the 1000 grit wet sand and the 2000 grit wet sand. So the order should be 1000 grit or 1200 grit to remove orange peel and dust etc... Then rubbing compound then 2000 grit sanding. I have that using final glazing compound after all wet sanding is done, I get a cloudy finish. So I back and and again. As this is a recent paint job (3 days), I am wondering if it is too early to put on glazing compound. In all instances I have been using rubbing, swirl remover and glazing compound without direct sun. Any ideas why I am getting the cloudy finish in the final glaze stage. I rubbed and rubbed and it would not come out.
Thanks Wes
Thanks Wes
Comment