5 Video segments on wet-sanding and using a rotary buffer

[Mike Phillips]

5 Video segments on wet-sanding and using a rotary buffer


This footage was filmed and edited by Shawn aka MaximusZTS from a Thursday Night Class held on April 26th, 2007


Wetsanding Video 1

Wetsanding Video 2

Wetsanding Video 3

Wetsanding Video 4

Wetsanding Video 5

[Nappers]

Re: 5 Video segments on wet-sanding and using a rotary buffer

Those are awesome video's if anyone hasn't seen them yet!

Aaron

[bob_amos]

Re: 5 Video segments on wet-sanding and using a rotary buffer

Great videos. Looked like everyone had fun while learning. Mike seems to be a very informative instructor. Ya gotta see them if you already haven't.

[JAC]

Re: 5 Video segments on wet-sanding and using a rotary buffer

Great videos!

Thanks for posting them.

[BMW_320i]

Re: 5 Video segments on wet-sanding and using a rotary buffer

Great Video.Mike

[Mike Phillips]

Re: 5 Video segments on wet-sanding and using a rotary buffer

And just to note because there's a number of Mikes here at Meguiar's... the "Mike" in the video is Mike Pennington our Director of Training, not myself.

LOL

[Jokeman]

Re: 5 Video segments on wet-sanding and using a rotary buffer

Great video's. I'd love to fly out and take one of the classes someday.

[EAT HEMI]

Re: 5 Video segments on wet-sanding and using a rotary buffer

Very informative video.

[spyghost]

Re: 5 Video segments on wet-sanding and using a rotary buffer

out of curiosity, which is suppose to be the best practice in the industry? place the compound/polish on the finished surface or place it on the foam/wool?

[Mike Phillips]

Re: 5 Video segments on wet-sanding and using a rotary buffer

out of curiosity, which is suppose to be the best practice in the industry? place the compound/polish on the finished surface or place it on the foam/wool?

When using a rotary buffer, you place a strip of product on the panel and then pick it up with your pad spinning on the rotary buffer like demonstrated in these videos.

When using a tool that oscillates, like a DA Polisher, you apply the product directly to the face of the pad and than place the face of the pad against the finish before turning it on.

[AeroCleanse]

Re: 5 Video segments on wet-sanding and using a rotary buffer

And just to note because there's a number of Mikes here at Meguiar's... the "Mike" in the video is Mike Pennington our Director of Training, not myself.

LOL

Do you have to be named Mike to work at Meguiar's?

[woodturner2]

Re: 5 Video segments on wet-sanding and using a rotary buffer

Does anyone know what wool buffing pad they are useing in the video?

[Mike Phillips]

Re: 5 Video segments on wet-sanding and using a rotary buffer

Does anyone know what wool buffing pad they are using in the video?

In the first video segment, this one,

http://www.youtube.com/watch?v=6f8EQNVxxbw

That's an 8" W-4000 Wool Cutting pad.

[aga]

Re: 5 Video segments on wet-sanding and using a rotary buffer

can this wool pad be used with a DA?

[Eddie6th]

Re: 5 Video segments on wet-sanding and using a rotary buffer

I just noticed these videos.

Really enjoyed watching. Thanks for making them.