I recently purchased a metallic black 2003 Chevy truck. I bought it off ebay sight unseen. I just had my first chance to give it a quick wax with #66. Much to my dismay I found some clear coat failure. Two 2"X2" circles on the hood and 3 same size spots on the roof.
My process for fixing them would be to wet-sand the areas until I get to the base coat. Rattle can clear onto the areas and then feather in the new clear by wet-sanding. Will this work? My main concern is that even though the clear is only failing in certain spots now, the rest of the hood and roof will soon follow. Is that how CC failure works? Or is it just the visible areas that have been compromised? Any advice on my process or how CC failure works?
Thanks!
My process for fixing them would be to wet-sand the areas until I get to the base coat. Rattle can clear onto the areas and then feather in the new clear by wet-sanding. Will this work? My main concern is that even though the clear is only failing in certain spots now, the rest of the hood and roof will soon follow. Is that how CC failure works? Or is it just the visible areas that have been compromised? Any advice on my process or how CC failure works?
Thanks!
Comment