• Currently Active UsersCurrently Active Users

    2 members and 754 guests

    Most users ever online was 3,882, May 6th, 2016 at 05:36 PM.

    1. Marc08EX,
    2. RDVT4ME
  • Recent Forum Posts

    ARTB155

    Re: MT310 BP's

    Michael

    Thank you very much for clarification. I use your machine last 12 months or so and I am very happy with it.
    The only reason

    ARTB155 Jun 26th, 2017, 10:13 AM Go to last post
    Michael Stoops

    Re: MT310 BP's

    If I might chime in here: The MT3xx series tool (last two digits change based on geographic region, dictated by voltage and plug type for those who are

    Michael Stoops Jun 26th, 2017, 10:03 AM Go to last post
    Brian Hann

    Re: MT310 BP's

    "Useless" would probably be too strong of a word. Yes, in some situations the 5" system will certainly perform better. There are also

    Brian Hann Jun 26th, 2017, 09:51 AM Go to last post
    ARTB155

    Re: MT310 BP's

    Brian

    OK, pretty much all clear.
    So, does DBP6 with your DFC/DFP and DFF 6" pads useless with MT300/310 or just not perform as

    ARTB155 Jun 26th, 2017, 09:44 AM Go to last post
    Nick Winn

    Re: Thanks for the add

    Welcome to Meguiar's Online! Feel free to contact me with any questions.

    Nick Winn Jun 26th, 2017, 08:55 AM Go to last post
    chevybreezin

    Thanks for the add

    Hey chevybreezin here..tks for add.
    From London Ontario.

    chevybreezin Jun 26th, 2017, 08:52 AM Go to last post
    Nick Winn

    Re: What Foam Pads will work with my G110V2?

    We understand you do not want to change the backing plate out. I wanted to bring up that you can gain a big increase in cutting & finishing performance

    Nick Winn Jun 26th, 2017, 08:50 AM Go to last post
    locorecto

    Re: Minor Swirl Marks after Sanding/Compound/Polish/Wax

    Thanks for the quick reply.



    I think they might be "spiderweb like swirl marks" since they were very fine. I would

    locorecto Jun 26th, 2017, 08:47 AM Go to last post
    Nick Winn

    Re: Minor Swirl Marks after Sanding/Compound/Polish/Wax

    Welcome to MOL. Do you have spiderweb like swirl marks in the paint you are trying to remove? Or do you have actual sanding marks left in the paint?

    Nick Winn Jun 26th, 2017, 08:40 AM Go to last post
    locorecto

    Re: Minor Swirl Marks after Sanding/Compound/Polish/Wax

    Another theory is that I might have not be that thorough while using the DA power system. I have read that you need to do some extra work when working

    locorecto Jun 26th, 2017, 08:36 AM Go to last post
    locorecto

    Locorecto from NY

    My Jean aka Locorecto from NYC. I drive a 2008 Acura MDX. I thanks everyone for keeping this community so helpful to car enthusiast and people who like

    locorecto Jun 26th, 2017, 08:31 AM Go to last post
    Brian Hann

    Re: MT310 BP's

    Technically a DBP6 can be used but is not ideal. This machine was dialed in specifically for our system of 5" pads. You will experience better

    Brian Hann Jun 26th, 2017, 08:28 AM Go to last post
    twisty roads

    Re: What Foam Pads will work with my G110V2?

    with the W67DA backing plate you can use any soft buff 2.0 pad (W8006/W8209 etc). I personally never went above 6 inches because I didn't like that big

    twisty roads Jun 26th, 2017, 08:26 AM Go to last post
    Nick Winn

    Re: Meguiar's Saturday Detailing 101 Class Sign Up - July 15th, 2017

    ***List is Updated***

    Nick Winn Jun 26th, 2017, 08:26 AM Go to last post
    ARTB155

    Re: MT310 BP's

    Thx Brian and what about DBP6 using with MT310

    ARTB155 Jun 26th, 2017, 08:20 AM Go to last post
  • Recent Activity

    Michael Stoops

    Chip and scratch repair

    Thread Starter: Michael Stoops

    From time to time the topic of chip repair comes up here on MOL and, even though Meguiar's doesn't really make touchup paint or a specific repair kit for this sort of damage, we just might be able to help with the process. Chips don't just happen on the leading of the hood or front bumper,...

    Last Post By: amblin83 Jun 25th, 2017, 12:09 PM Go to last post
    Nick Winn

    Meguiar's Saturday Detailing 101 Class Sign Up - July 15th, 2017

    Thread Starter: Nick Winn

    Saturday Detailing 101 Class Sign up Thread - July 15th, 2017 On the below scheduled Saturday, Meguiar's will host our " Saturday Detailing 101 Class" in which registered members of Meguiar's Online Discussion Forum can sign up to attend. Meguiar's Detailing 101 Class consists of a classroom...

    Last Post By: Nick Winn Jun 26th, 2017, 08:26 AM Go to last post
    Don

    Meguiar's Fast Finish ... First Impressions & Updates

    Thread Starter: Don

    Yesterday was beautiful, in the 70*s, light breeze and the wife slept until noon. I figured that now was the time to try out the Meg`s FF that I picked up last week (I know I`ve got the McKee`s 37 Coating coming, but I`ll just polish the car before applying it). I wanted to see how well the...

    Last Post By: atikovi Jun 25th, 2017, 12:16 PM Go to last post
    gwongster

    Rough surface - Rotary buffer, Paint Cleaner or Clay?

    Thread Starter: gwongster

    Hi, I have 2 cars. One, which my wife drives is a BMW E90 3 series which is a year old. I drive a VW Touareg V8 which is comin up on its second year. The BMW, when I bought it had a 3 year coating put on it and the VW had a 5 year CPC paint sealant applied. Now, both cars have some sort of...

    Last Post By: kd1659 Jun 25th, 2017, 06:24 PM Go to last post
    Wayne "Dr. Detail" Loomis

    Airplane Products

    Thread Starter: Wayne "Dr. Detail" Loomis

    Hello. This is Dr. Detail's 1st post this time around. I have a Q. for the experts on vintage Meguiars. I recently came across a glass bottle marked Machine Glaze but in place of "Automobile" it says "Airplane". Is there any info on this product, it's rarety, what other Airplane products were...

    Last Post By: amblin83 Jun 25th, 2017, 01:47 PM Go to last post
  • Forum Stats

    Number of Members: 51,527
    Total Threads: 59,652
    Total Posts: 549,367
    Currently Online: 756

    Newest Member: Chief Norm
  • New to MOL?

  • Detailing Class Information

  • Connect with us through....

     

    Subscribe to me on YouTube      

  • Meguiar's Direct