• Currently Active UsersCurrently Active Users

    3 members and 525 guests

    Most users ever online was 3,882, May 6th, 2016 at 05:36 PM.

    1. ajb39oh,
    2. Original Equipment,
    3. RX300
  • Recent Forum Posts

    RX300

    Re: Frustrated by swirls

    Also I will get pictures tomorrow and post them here for better reference

    RX300 Nov 19th, 2017, 04:12 PM Go to last post
    RX300

    Re: Frustrated by swirls

    I finished putting wax on it tonight. I have to drive it tomorrow and was afraid to leave it in the elements at work with just polish and compound on

    RX300 Nov 19th, 2017, 04:12 PM Go to last post
    The Guz

    Re: New Car

    It enhances the sense of touch.

    The Guz Nov 19th, 2017, 12:14 PM Go to last post
    Davidval18

    Re: MT320 Dual Action Polisher Rattling Noise?

    Update!

    Received my new MT320 Dual Action Polisher and the rattling noise is not as audible as in the fist machine, big difference!

    Davidval18 Nov 19th, 2017, 12:12 PM Go to last post
    The Guz

    Re: Frustrated by swirls

    The DA power system is good but it is still limited to the results it can produce. If the defects are deep then you may run into an issue. Same if the

    The Guz Nov 19th, 2017, 12:10 PM Go to last post
    Patman

    Re: New Car

    I've never quite understood what the purpose of the sandwich bag is though? Why can't you just lightly run your fingertips along the finish to feel how

    Patman Nov 19th, 2017, 11:56 AM Go to last post
    RX300

    Re: Frustrated by swirls

    2010 Chrysler 300. Used the pads (compound/polishwax pads) that go with the meguiars da power system that attaches to a drill. I used the DA and by hand

    RX300 Nov 19th, 2017, 11:45 AM Go to last post
    The Guz

    Re: Frustrated by swirls

    Lets try this again. This forum is funny at times.



    It sounds like a technique issue. Could we get some more information.

    The Guz Nov 19th, 2017, 11:28 AM Go to last post
    The Guz

    Re: Frustrated by swirls

    [QUOTE=RX300;583558]Black car, few scratches.

    i used ultimate compound on the scratch areas that ultimate polish didn

    The Guz Nov 19th, 2017, 11:03 AM Go to last post
    roushstage2

    Re: How can I prevent water spots?

    You could invest in a filtration system to help, but without spending a good chunk of money on it, you'd still need to physically dry it to prevent water

    roushstage2 Nov 19th, 2017, 09:53 AM Go to last post
    Original Equipment

    How can I prevent water spots?

    Hi,
    I washed our dark green car yesterday. It was easy to wash because it had a nice coat of Meguiar's Ultimate Wax on it. The water beaded and

    Original Equipment Nov 19th, 2017, 09:14 AM Go to last post
    tcope1

    Re: Frustrated by swirls

    First, Ultimate Polish is not a product used for correction, it's a glaze. It uses oils to fill in maring on the paint.

    Really difficult

    tcope1 Nov 19th, 2017, 07:57 AM Go to last post
    RX300

    Re: Frustrated by swirls

    Also I used a meguiars microfiber towel to remove. Tried applying products by hand as well and still have the same results

    RX300 Nov 19th, 2017, 06:45 AM Go to last post
    RX300

    Frustrated by swirls

    Black car, few scratches.

    i used ultimate compound on the scratch areas that ultimate polish didn’t help on. I noticed swirls started

    RX300 Nov 19th, 2017, 06:24 AM Go to last post
    Sleper

    Re: Do you know of a car show or event that Meguiar's is NOT a part of?

    St Ignace Car Show Michigan USA http://www.saintignace.org/event/st-...-show-weekend/

    Sleper Nov 19th, 2017, 05:43 AM Go to last post
  • Recent Activity

    Michael Stoops

    Do you know of a car show or event that Meguiar's is NOT a part of?

    Thread Starter: Michael Stoops

    We're looking for ways to expand our already very broad reach into the world of the car hobby, and we need your help. As you probably already know, Meguiar's sponsors literally thousands of events every year, but there are some events that we've never been associated with for one reason or...

    Last Post By: Sleper Nov 19th, 2017, 05:43 AM Go to last post
    mis3

    New Car

    Thread Starter: mis3

    I am taking delivery of a new car which wa build maybe a few weeks ago. Based on the weather, I will not be able to full detail the car. I will put tint and clear bra as soon as possible. If there is overspray on the new car, can I remove them in early spring?

    Last Post By: The Guz Nov 19th, 2017, 12:14 PM Go to last post
    RX300

    Frustrated by swirls

    Thread Starter: RX300

    Black car, few scratches. i used ultimate compound on the scratch areas that ultimate polish didn’t help on. I noticed swirls started so I decided to stop using the ultimate compound and went right to polish. Low and behold my car is covered in swirls now. i washed the car and clay barred...

    Last Post By: RX300 Nov 19th, 2017, 04:12 PM Go to last post
    Davidval18

    MT320 Dual Action Polisher Rattling Noise?

    Thread Starter: Davidval18

    Hi, I recently bought a Meguiar’s MT320 Dual Action Polisher, and I would like to ask a technical question regarding my new polisher machine, I hear a very loud rattling noise and this is the only video I found that is able to replicate and explain exactly my problem: ...

    Last Post By: Davidval18 Nov 19th, 2017, 12:12 PM Go to last post
  • Forum Stats

    Number of Members: 52,180
    Total Threads: 59,995
    Total Posts: 551,714
    Currently Online: 528

    Newest Member: loup
  • New to MOL?

  • Detailing Class Information

  • Connect with us through....

     

    Subscribe to me on YouTube      

  • Meguiar's Direct