Removing/ adding Chevrolet bowtie badge

[DRT BRD]

Wondering how you would go about removing these emblems that sit on the front of Chevy trucks and the rear. Would the old fishing line/heat gun method be used the same as side badging/molding to remove them?

[DRT BRD]

I think I found my answer! Two 10mm bolts held on the front and this particular truck has the traditional adhesive backing on the rear emblem!

[Michael Stoops]

Were you looking to permanently debadge this truck, or just for cleaning? Sounds like debadging is out of the question if one of the emblems uses 10mm bolts to hold it on!

[DRT BRD]

Were you looking to permanently debadge this truck, or just for cleaning? Sounds like debadging is out of the question if one of the emblems uses 10mm bolts to hold it on!

Thanks for the reply, Michael! Sorry for not being a little more clear. Customer is wanting to remove the stock gold bow ties and replace them with black painted ones. He wasn't responding to me, so I asked on here just to make sure. He sent me a picture of the back and the fronts have little pegs and the rear is flat. He told me a body shop was going to charge $30 per emblem to remove and replace.