View Full Version : help
Feb 5th, 2005, 09:35 PM
just got my G-100. gonna use it on my 2000 xterra. i'm gonna start with #80, my question is how long do i work the product in the 2x2 area? I know you dont let it haze but how long before the diminishing agents are gone? thanks for the help
Feb 5th, 2005, 10:13 PM
Probably about 20-30 seconds in that small of an area. Don't buff it until it dries. It should still be translucent and wet when you remove it.
Feb 6th, 2005, 06:47 AM
thanks one other question....what is the arm speed to use????:xyxthumbs :bow
Feb 6th, 2005, 07:01 AM
Use a slow motion. Alternate side /side and up/down. Be sure to overlap your passes by about 50%. This helps in break down of product.
As RamAirV1 stated it doesn't take long. You'll see the product change from a tan/brown color to clear (on a darker paint).
Check out this great post by one of our fellow members. Using #83 and #80, and getting your G100/PC to do the work of a rotary. (http://meguiarsonline.com/forums/showthread.php?s=&threadid=4382) A picture says 1000 words!!!
Have fun and good luck!
Feb 6th, 2005, 08:10 AM
I forgot that Mosca also used #80 in his demo. I was going to mention that thread but then deleted it because I thought it was #83 only LOL.
That demo should answer your questions.
Feb 6th, 2005, 10:29 AM
thanks for the rapid response guys ...very helpfull monday morning gonna sTART THE MAKEOVER...but gotta be at work by 3:00....hope i'mdone....thanks again