what to do after wet sand.....

[johnnyw]

I am going to attempt to wetsand my headlights today....my question is what to do after the sanding, buffing, etc are done. What is the best way to maintain the headlights in the future? Wax, # 17, etc.....

[Murr1525]

You could use PlastX as your final step, it has some protection in it.

I just wax mine gently.

[Megafast13]

I nice coat of PlastX and then NXT 2.0

[Carfire]

:iagree:

[dragonballz]

Can ultimate compound on G110 be used to remove the wet sanding marks on the plastic?

[Mike Phillips]

There's a number of threads in this forum you're posting to, this one,

Clear Plastic Detailing (http://meguiarsonline.com/forums/forumdisplay.php?f=66)

That show products and steps to follow just for this procedure...

Here some to check out...

http://meguiarsonline.com/forums/showthread.php?t=27470
http://meguiarsonline.com/forums/showthread.php?t=8011
http://meguiarsonline.com/forums/showthread.php?t=19255
http://meguiarsonline.com/forums/showthread.php?t=20994
http://meguiarsonline.com/forums/showthread.php?t=25810
http://meguiarsonline.com/forums/showthread.php?t=25365
http://meguiarsonline.com/forums/showthread.php?t=3699


:xyxthumbs

[Mike Phillips]

Here's a video with Mike Pennington restoring clarity with our Clear Plastics Restoration Kit

Clear Plastic Restoration Video (http://www.meguiars.com/video/index.cfm?playURL=rtmp://meguiars.flashsvc.vitalstreamcdn.com/meguiars_vitalstream_com/_definst_/RM_HRK.flv&VideoName=How%20to%20safely%20restore%20headlight%20lens%20in%20one%20step)


:xyxthumbs